|ID||Article Title||Post Date|
||Can I upgrade the power supply in the Sonnet eGFx Breakaway Box or Breakaway Box 550?||Sep-20-19|
||Does an eGPU accelerate Adobe After Effects?||Jun-21-21|
||Does the Breakaway Box support the AMD Radeon Vega 64, FE, WX8200 or WX9100, Radeon VII, or Radeon 5700 or 5700 XT?||Jan-12-20|
||The GPU-350W-TB3 and GPU-350W-TB3Z both have 350W power supplies, but only GPU-350W-TB3Z supports some higher end cards. Why?||Oct-21-19|
|Both SKUs have 350W power supplies, but they allocate the power differently:|
The GPU-350W-TB3Z box has one 8-pin plus one 6-pin power connector. 300W is available to the GPU card and 15W Power Distribution to a laptop.
The GPU-350W-TB3 box is available only as the Developer Edition and has one 8-pin power connector, which is adequate to support the included Radeon RX 580 card. 225W is available to the GPU card and 60W Power Distribution to a laptop.
The numbers don't add to exactly 350W because power is allocated in discrete steps and some power margin is required for transients.
Note that some Thunderbolt 3 PC laptops with dedicated power connectors do not accept power distribution. To check whether your Thunderbolt 3 PC laptop accepts power distribution, check here. Upstream power continues to be provided even when the computer is sleeping.
Every Thunderbolt 3 Macbook Pro will accept Power Distribution, up to 60W for the 13", and up to 85W for the 15"
||My Breakaway Box won't turn on.||Jan-06-21|
||I have a Windows computer with a discrete (internal) NVIDIA Quadro dGPU, and the external NViDIA GeForce or Titan eGPU is not recognized.||Jun-21-21|
||Can I use a Sonnet eGPU with Boot Camp?||Jun-21-21|
||What kind of performance can I expect from the NVIDIA Titan Xp (Pascal) with the eGFX Breakaway Box?||Nov-06-17|
|In a Sonnet eGFX Breakaway Box, the Titan Xp was performing at:|
Single-precision Float 12.4 Tflops/s
Double-precision Float 416 Gflop/s
Note: You may have read that some other manufacturers' external graphics boxes--even some with a higher power supply rating--fail under heavy load with the NVIDIA Titan Xp (Pascal) card. Not so with a Sonnet Breakaway Box. In choosing a power supply, Sonnet carefully considers not only the eGFX Box nominal power rating, but also its instantaneous peak power delivery capability. Sonnet runs many rigorous tests (including the CUDA-Z benchmark, set to Heavy Load Test Mode). The Sonnet eGFX Breakaway Box must pass the most stringent tests before we put it in your hands.
||How can I use the Sonnet eGPUs to accelerate games on the MacBook Pro or iMac internal video?||Jun-21-21|
||What power cable do I need for the Avid HDX card?||Jun-21-21|
||How do I use the Breakaway Box or RX 560/570 Puck with the LG Ultrafine 5K Display sold on the Apple store?||Jan-06-21|
||Sonnet's macOS-compatible external graphics supports up to 5 displays. How can I tile them into one large display?||Jan-06-21|
Open System Preferences.
Open Mission Control.
Uncheck Displays have separate Spaces.
||What is the maximum size GPU card that will fit in a Breakaway Box?||Jan-06-21|
||Which NVIDIA cards are supported as external GPUs.||Oct-21-19|
||I need to ship the Breakaway Box. Do I need to remove the card?||Jan-06-21|
||How do I get external graphics working on a Gigabyte motherboard?||Feb-03-23|
||My display is not being detected on macOS.||Jun-21-21|
||My 4K display is connecting only at 30Hz. Why I can't set it to 60Hz?||Jun-21-21|
|Your display may not support 60Hz. Your display might require a firmware update to support 60Hz operation. Contact the maker of your display for details.|
Many early 4K displays use Multi-Stream Transport (MST) to achieve 4k @ 60Hz. Follow these steps to use the display's built-in controls to enable this feature:
Sharp PN-K321: Choose Menu > Setup > DisplayPort STREAM > MST > SET
ASUS PQ321Q: Choose OSD menu > Setup > DisplayPort Stream
Dell UP2414Q and UP3214Q: Choose Menu > Display Setting > DisplayPort 1.2 > Enable
Panasonic TC-L65WT600: Choose Menu > Display Port Settings > Stream Setting > Auto
Other DisplayPort displays: check with the display manufacturer for compatibility information.
Make sure the HDMI cable you are using is a Premium High-Speed HDMI Cable certified by HDMI.org.
If you are trying to connect at 4k@60Hz via HDMI 2.0, you may have to set the color depth to 8-bit at 4:4:4, 10-bit at 4:2:2, or 12-bit at 4:2:0, or you may exceed the HDMI 2.0 bandwidth. A few 4K TVs (2017 Element Fire TV and 2017 LeEco Super 4, for example) don't support 4K@60Hz@4:4:4 at all.
For connecting to a 4K TV, you may need make a custom color resolution. Set resolution to 3840x2160 at 60Hz and set Timing standard to CVT-RB (reduced blanking). Some TVs require you to turn on "UHD Color" or "Advanced" or "Enhanced" setting manually in the picture settings for the HDMI port.
||How to Solve the DP No Video / Wrong Resolution Issue with the Dell P2715Q / P2415Q Flat Panel Monitors||Jun-21-21|
||Will a Sonnet eGPU accelerate internal video on a Mac?||Jun-21-21|
||Does Final Cut Pro use the external GPU in a Breakaway Box, or Breakaway Puck, or DuoModo eGPU Module?||Jun-21-21|
||Does the Breakaway Box or RX 560/570 Puck support the LG UltraFine 4k Display sold by Apple?||Jan-06-21|
|The DisplayPort output of a graphics card is not compatible with the Alt Mode DisplayPort input of the LG UltraFine 4K Display.|
The LG Ultrafine 4K Display can be connected to one of the Thunderbolt 3 USB-C ports. To give both the display and the Breakaway Box/Puck each maximum bandwidth, connect them to independent Thunderbolt 3 controllers, if possible.
The 13" Macbook Pro with Touchbar, 15" MacBook Pro, Mac mini, and iMac Pro have two independent Thunderbolt controllers. Connect the Display and the Breakaway Box/Puck to ports on different sides.
The 13" MacBook Pro without Touchbar and the iMac with Retina display and the have only one Thunderbolt controller. The LG Ultrafine 4K Display will reserve all the bandwidth it needs, and the Breakaway Box/Puck will be allocated the remaining bandwidth, which may affect performance of the Breakaway Box/Puck.
If you are using macOS 10.14.4+, you can accelerate applications and games with the eGPU if they support GPU acceleration...
Select the app in Finder
Select Prefer External GPU
Professional applications that use an external GPU generally may have a preference selection inside the app to select the external GPU.
||I purchased a Breakaway Box bundled with a Radeon GPU card and now I need warranty service on the GPU card.||Sep-20-19|
||I'm connecting from a DVI (or sometimes DP) port on my GPU Card--via an adapter cable--to an HDMI port on my monitor and the display looks magenta.||Jun-21-21|
||How do I extend the length of a DisplayPort cable?||Jun-21-21|
||I connected my monitor to the Breakaway Box, Breakaway Puck, or DuoModo eGPU Module on my 2018 or newer Mac mini, but it boots with a black screen.||Jun-21-21|
|If you have a 2018 or newer Mac mini with FileVault turned on, you must connect your primary display directly to the HDMI port on your Mac mini during startup in order to enter your encryption password. After you log in and see the macOS Desktop, you can unplug the display from Mac mini and connect it to your eGPU.|
Under macOS 10.14.6, a 2018 Mac mini with some GPU cards must be booted with a monitor connected to the Mac mini's HDMI port. If you have a Mac mini with an affected GPU card, you must either:
(a) Update to macOS 10.15.7+
(b) Connect an HDMI display emulator plug to the Mac mini HDMI port and mirror displays. (You must make sure that the HDMI display emulator is the Master Mirror. Drag the menu bar to the HDMI display emulator window before mirroring.)
(c) Connect a monitor to the Mac mini's HDMI port to log in, and then move the HDMI monitor connection to the eGPU.
||I'm trying to use four HDMI monitors by adding DP-to-HDMI adapters, but it doesn't work.||Jun-21-21|
|Use at least one active DP-to-HDMI adapter.|
Display Port signal is not compatible with HDMI.
However, on most modern GPU cards, the DisplayPort output is a Dual mode DisplayPort (DP++), which has the ability to recognize and adjust the signal to HDMI when a passive DP-to-HDMI adapter cable is connected, but only up to a point. If the HDMI monitors you are trying to connect are identical (use identical video signal timings), then you should be able to use passive adapters for all. However, if the monitors are different, then there may be a limit of two special clocks to drive passive DP to HDMI adapters; ergo only two HDMI monitors may be supported with passive adapters; the third and subsequent monitor would need to be native DisplayPort or would need to use an active DP-to-HDMI adapter.
Older generation GPU cards require the use of active DP-to-HDMI adapters on every DP port.
||I'm trying to use an additional HDMI monitor by adding a DP-to-HDMI adapter, but it doesn't work.||Jun-21-21|
||Do not disconnect or power off you eGPU during sleep or your Mac will crash.||Apr-20-21|
||I upgraded to macOS 12.4 and my Vega 56 is no longer seen by macOS.||Nov-25-22|
||My computer will randomly freeze||Feb-25-23|